Monday, December 18, 2017
 

Downloads Print E-mail

UPS WORLDSHIP DRIVERS
7010-PROTOCOL SERIAL RS-232 DRIVERS (v3)
7010-PROTOCOL SERIAL RS-232 DRIVERS (v2) LEGACY -- NOT FOR NEW DESIGN
NCI-PROTOCOL SERIAL RS-232 DRIVERS
OPOS POS SERIAL RS-232 DRIVERS -- BASIC INSTALLATION AND TEST KIT
OPOS POS SERIAL RS-232 DRIVERS -- ADVANCED DEVELOPERS KIT
OPOS POS SERIAL RS-232 DRIVERS -- OPTIONAL COMMON CONTROL OBJECT
FEDEX SHIP MANAGER CONFIGURATION
335/PS25/PS-USB/6700U Series USB DRIVERS
CP130 PRINTER COMMUNICATIONS
CP103 PRINTER COMMUNICATIONS
LP250/LP470 PRINTER DIAGNOSTICS

Software Descriptions
Documents
File
 
 UPS WORLDSHIP DRIVERS  

Scale Drivers Installer for UPS WorldShip (v14)
These drivers allow various scales to connect and display weight in UPS WorldShip 2011.
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.


INSTALL

AWTXWS14
Scale Drivers Installer for UPS WorldShip (v12)
These drivers allow various scales to connect and display weight in UPS WorldShip 2010.
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.

INSTALL

AWTXWS12
Avery Weigh-Tronix awtxScaleTest (v1.1)
A utility program used to verify scale operation with a computer, UPS WorldShip and FedEx Ship Manager. Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.

File Dependency:
The awtxScaleTest program requires access to some graphics drawing capabilities that are not always available on many computers. If the application does not launch properly, please try installing the following support file:
Microsoft.VisualBasic.PowerPacks3Setup.zip
Simply click on the above link to download the zip file (to any convenient directory). Then, UNZIP the file, and then double-click the PowerPacks3Setup.exe file to perform the installation.
Note: Installation could take several minutes as help file documents are also generated.
Please be patient.


Repackaged 31-MAY-14
Due to difficulties using 'ClickOnce' installation on some platforms, the application has been rebuilt to discontinue use of ClickOnce publishing and to instead use simple 'copy' (.exe file) to destination.

After downloading the ZIP file, simply unzip it to extract the awtxScaleTest.exe application file. You can place this file in any folder you wish.
Note: since it is no longer uses a full installation package, your computer must already have the .NET 3.5 Framework installed on it for this application to run. If it does not you may install the framework from the Microsoft website.
Also, no desktop shortcut will be automatically installed. To create one yourself manually, simply right-click on the application file name and select 'Create Shortcut'.
 

awtxScaleTest (v1.1)
 
 7010-PROTOCOL SERIAL RS-232 DRIVERS (v3)  

WTCommScl ActiveX Control (v3, for 7010/335/PS25 Scales)
A 32-bit ActiveX Control (OCX) used to interface model 7010, 335 and PS25 scales to a computer.
Installs on Win XP (32-bit) and above (may require 64-BIT Upgrade below) -- Supports RS-232 only.
Upgraded (from v2 control) to provide a more robust disconnect/connect
handling mechanism for stamps.com.

Documents:
1) App Note -- (EAN-04) WTCommScl (v3) ActiveX Control (document style format updated also)
2) Serial Communications Protocol (SCP-11) -- Model 7010 (also applies to 335 and PS25)


1

2

OCX7010 (V3)
WTCommScl ActiveX Control -- Upgrade (v2/v3)
Upgrade for the WTCommScl 32-bit OCX Control so that it can be used on 64-bit (as well as 32-bit)
computers. This upgrade works for both v2 and v3 ActiveX controls.
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.
WTCommScl (v3) ActiveX above must be installed first before installing this Upgrade.
 -

OCX7010
UPGRADE (v2/v3)
WTCommScl ActiveX Control -- Test Program-3
A simple executable test program that can be used to verify operation of the OCX Control (v3) and a
7010, 335 or PS25 scale.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit).
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.
Requires WTCommScl (v3) ActiveX Control and Upgrade.
 -

OCX7010
TEST-3
WTCommScl ActiveX Control -- Test Program-3 Source Code
Project source code (written in C#) for the WTCommScl ActiveX Control Test Program-3 above.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit).
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit), Uses C# with minimum .NET Framework (v2.0)
 -

OCX7010
TEST-3 CODE
 
 7010-PROTOCOL SERIAL RS-232 DRIVERS (v2) LEGACY -- NOT FOR NEW DESIGN  

WTCommScl ActiveX Control (v2, for 7010/335 scales)
A 32-bit ActiveX Control (OCX) used to interface model 7010 and 335 scales to a computer.
Installs on Win XP (32-bit) and above (may require 64-BIT Upgrade below) -- Supports RS-232 only.

Documents:
1) Application Note (EAN-08) -- What is an ActiveX Control
2) Application Note -- (EAN-04) The WTCommScl ActiveX Control
3) Serial Communications Protocol (SCP-11) -- Model 7010


1

2

3

OCX7010
WTCommScl ActiveX Control -- Upgrade
Upgrade for the WTCommScl 32-bit OCX Control so that it can be used on 64-bit (as well as 32-bit) computers.
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.
WTComm ActiveX above must be installed first before installing this Upgrade.

INSTALL

OCX7010
UPGRADE
WTCommScl ActiveX Control -- Test Program
A simple executable test program that can be used to verify operation of the OCX Control and7010 scale.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit)
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.
Requires WTComm ActiveX Control and Upgrade.

INSTALL

OCX7010
TEST
WTCommScl ActiveX Control -- Test Program Source Code
Project source code (written in C#) for the WTCommScl ActiveX Control Test Program above.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit)
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit), Uses C# with minimum .NET Framework (v2.0)

ABOUT

OCX7010
TEST
CODE
 
 NCI-PROTOCOL SERIAL RS-232 DRIVERS  

WTComm ActiveX Control (v3, for any scale w/NCI protocol)
A 32-bit ActiveX Control (OCX) used to interface any scale with NCI protocol to a computer.
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.

Documents:
1) Application Note (EAN-08) -- What is an ActiveX Control
2) Application Note (EAN-07) -- The WTComm ActiveX Control
3) Serial Communications Protocol (SCP-01) -- NCI Standard


1

2

3

OCXNCI
 

INSTALL
 
WTComm ActiveX Control -- Test Program
A simple executable test program that can be used to verify operation of the OCX Control and scales using the NCI Standard serial protocol.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit)
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.

INSTALL

OCXNCI
TEST
WTComm ActiveX Control -- Test Program Source Code
Project source code (written in C#) for the WTComm ActiveX Control Test Program above.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit)
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit), Uses C# with minimum .NET Framework (v2.0)

ABOUT

OCXNCI
TEST
CODE
 
 OPOS POS SERIAL RS-232 DRIVERS -- BASIC INSTALLATION AND TEST KIT

OPOS BASIC KIT

WTScaleSO.DLL (v1.6, OPOS Scale Service Object)
A 32-bit ActiveX DLL driver used to integrate Avery Weigh-Tronix scales into OPOS-compliant POS systems.

WTScaleAdmin (v2, AWTX Scale SO Administration Utility)
A simple executable utility program used to install and configure the WTScaleSO DLL driver.
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only, Requires scale to support NCI-ECR or NCI-OPOS serial protocols only.


PROTOCOL


QUICK START


SOPACK
WTScaleSO.DLL -- Test Program (v1.6)
A simple executable test program that can be used to verify operation of the DLL Scale Service Object with scales using the NCI-ECR or NCI-OPOS serial protocols only.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit)
Works with OPOS Scale-Device CCO versions (v1.6 thru v1.13)
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit) -- Supports RS-232 only.

INSTALL

SOTEST
Scale/OPOS Preliminary Test Recommendations and FAQ's
This document presents a step-by-step sequence of tests that should be performed in order to verify the proper operation of scale communications, the Service Object, and the Common Control Object (for scales) before attempting to integrating them into a POS application.

TEST/FAQs
-
 
 OPOS POS SERIAL RS-232 DRIVERS -- ADVANCED DEVELOPERS KIT

OPOS ADVANCED KIT

WTScaleAdmin (v2, AWTX Scale SO Administration Utility) -- Source Code
This is the original project source code for the WTScaleAdmin administration utility program used to test/verify the OPOS scale-device CCO and the Avery Weigh-Tronix Scale SO.
This legacy software requires the Visual Basic 6 (SP6) development tools and possibly other legacy ActiveX Controls depending on what operating system the project is placed on.

Documents:
1) Application Note (EAN-08) -- What is an ActiveX Control
2) Application Note (EAN-18) -- The WTScaleSO Scale Control and WTScaleAdmin Program
3) Serial Communications Protocol (SCP-02) -- ECR Standard and OPOS Extensions


1

2

3

ADMIN
CODE
WTScaleSO.DLL -- Test Program (v1.6) Source Code
Project source code (written in C#) for the WTScaleSO DLL driver Test Program above.
Developed using Visual Studio 2008, C#, .NET 2.0, x86 Target Mode, on Windows 7 (64-bit)
Works with OPOS Scale-Device CCO versions (v1.6 thru v1.13)
Installs on Win XP (32/64-bit) and Win 7 (32/64-bit), Uses C# with minimum .NET Framework (v2.0)

ABOUT

SOTEST
CODE
 
 OPOS POS SERIAL RS-232 DRIVERS -- OPTIONAL COMMON CONTROL OBJECT  

OPOSScale.OCX (v1.13, OPOS Scale Common Control Object)
A 32-bit ActiveX Control (OCX) driver used to integrate any manufacturers scale into OPOS-compliant POS systems. The installation of this version of the scale common control object driver is optional.

This scale-only OPOS common control object was extracted from the complete 1.13.001 CCO Runtime (ZIP File) release of 2010/03/01 provided by RCS; A Division of NCR; Dayton, Ohio, and as developed by MCS, Inc. It was repackaged and provided here as a convenience to customers of Avery Weigh-Tronix.


INSTALL

CCO113
 
 FEDEX SHIP MANAGER CONFIGURATION  
Scale Configuration for FedEx Ship Manager (v2472 and newer)
This document explains how to configure FedEx Ship Manager to receive weight data from various Avery Weigh-Tronix scales. -- Supports RS-232 only.

30-APR-11
-
Frequently Asked Questions
Answers to some general questions regarding interfacing scales to POS devices, and shipping applications such as UPS WorldShip and FedEx Ship Manager.

21-APR-11
-
 
 335/PS25/PS-USB/6700U Series USB DRIVERS  
Scale USB Driver for Model 335, PS25, PS-USB and 6700U Series Scales
Windows 7 computer, for use with the Brecknell Model 335, PS25, PS-USB and 6700U Series Scales.
Note: the preferred method of installing the latest driver is to use the Win 7 automatic hardware detection/driver installation process.

INSTALL

CH341SER__X32_X64
Model 335 Postal Scale to Stamps.com Pro Software
This document describes how to install support drivers to your Windows 7 (32-bit or 64-bit) computer to allow the Stamps.com Pro Software to read weight data from the Model 335 Postal Scale.
-
 
 CP130 PRINTER COMMUNICATIONS

BAUD SETUP UTILITY
 
 CP103 PRINTER COMMUNICATIONS

MINI-PRINTER TOOL
 
 LP250/LP470 PRINTER DIAGNOSTICS

LP250/LP470 DIAGNOSTIC TOOL
 

Visiting us from Canada? Please click here to go to Brecknell Canada.
Visiting us from the United Kingdom? Please click here to go to Brecknell UK.